Product Description
Heatmiser Wireless Air Sensor
Important compatibility notice:
The Wireless Air Sensor is only compatible with neoHub G2 and is not supported by neoHub G3. If you are using neoHub G3, please do not purchase this sensor.
The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required.
The Wireless Air Sensor pairs directly with the Touch v2 and Edge. When used with the Neo System, the sensor pairs to the neoHub G2 and is then linked to the appropriate zone.
Using the Wireless Air Sensor with the Neo System
With this addition, your Neo system can measure temperature from a single wireless air sensor or multiple sensors when an averaged reading is required across a larger area.
The Wireless Air Sensor pairs to the neoHub G2 using the Android or iOS app. Once linked, you can choose how the system operates:
- Monitoring – Measure temperature in another area of the home.
- Pair to Zone – Link the sensor to an existing neoStat.
If you select Pair to Zone, two options are available:
- Averaging – Combines the thermostat’s internal sensor with the wireless sensor.
- Remote Only – Disables the internal sensor and uses the wireless sensor as the primary temperature reference. Multiple sensors will be averaged.
Specification
Range: 40 metres open space. The Wireless Air Sensor communicates directly with the neoHub G2 and does not benefit from the Neo mesh network. Additional boosters such as neoPlug or Boost may be required.
RF Frequency: 868MHz
IP Protection: IP20
Important Neo Compatibility Notes
- Wireless Air Sensor support is only available on neoHub G2. It is not compatible with neoHub G3. To identify your hub, check the rear label for “2nd Generation”.
- The Wireless Air Sensor is not visible in Apple HomeKit.
- The sensor communicates directly with neoHub G2. Signal boosters may be required depending on property size.
- For compatible thermostats, consult the Wireless Air Sensor datasheet.
Product Videos
Custom Field
Product Reviews
97 Reviews Hide Reviews Show Reviews
-
Review
Unobtrusive easy to set up
-
Review
Air sensor is discrete and works well as an individual temperature sensor in the app but struggles to integrate with other programmers via the hub gen 2 for me.
-
Review
easy to set up and integrate into existing system
-
Review
Easy to install.
-
Review
The remote air sensors are a great idea in theory, though in practice leave a lot to be desired! On the 2 that I purchased one was 1.7°c out and the other was as much as 2.3°c out, with no way to calibrate or a software offset to compensate, making them next to useless. One of them has also been sat at 20.5°c for 2 days without altering even though I have checked and know the temperature has changed by several degrees(noted on 2 separate thermometers.
-
Review
It is simple enough to setup and use.
-
Review
Small, simple, easy to use. Can not be any less difficult to expand your thermostatic set up.
-
Review
Inaccurate temperature measurements
-
Review
Works as intended