Underfloor Heating Actuator - Heatmiser TA230 The Heatmiser TA230 is our 2 wire thermal actuator. 230v Powered 2 Wire Normally Closed M30 Thread Stroke Length 3.5mm +/- 0.5 Datasheet MSRP: Was: Now: £16.70
Remote Sensor Probe - 3M This sensor can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. MSRP: Was: Now: £6.95
SALE Heatmiser neoPlug - Smart Plug Expand your Neo System with neoPlug and control your Appliances from Anywhere. Auto / Manual Operating Mode 5/2 Day or 7 Day Operating ode 4 Switching Times per Day Compatible with Geo Location & Recipe Function... MSRP: Was: £45.80 Now: £39.00
Heatmiser Wireless Air Sensor Heatmiser Wireless Air Sensor The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required... MSRP: Was: Now: £16.10
HomeKit-Enabled Heatmiser neoHub Gen 2 HomeKit-Enabled neoHub (2nd generation) Heatmiser neoHub G2 is the gateway to the Neo System, providing remote control of all neoStat's and neoPlug's from your iOS or Android device. The Heatmiser neoHub G2 connects to your... MSRP: Was: Now: £162.70
Heatmiser Thimble Sensor This thimble sensor is compatible with all Heatmiser Thermostats that accept remote sensors. The sensing element is mounted in an attractive ‘thimble’ enclosure for surface mounting, typically on a backplate or a... MSRP: Was: Now: £16.10
Empty Room Sensor Enclosure Empty Room Sensor Enclosure Dimensions 80Wx 80H x 22D mm MSRP: Was: Now: £6.95
Wall Plate for neoStat Compatible with: Heatmiser neoStat v1 and neoStat v2 Dimensions: 11cm x 11cm MSRP: Was: Now: £3.05
neoAir Stand The Heatmiser neoAir Stand has been specifically designed for the neoAir, allowing you to position the neoAir thermostat on a table. Colour: White (neoAir Not Included) Trustpilot MSRP: Was: Now: £11.97
Two Heating Zones & Hot Water Wireless Receiver - Heatmiser RF Switch v2 Heatmiser RF-Switch v2 The RF-Switch v2 is our surface mount wireless receiver. It is capable of controlling 2 heating zones and 1 hot water zone. Compatibility The RF Switch v2 is compatible with the Slimline-RF v3 and... MSRP: Was: Now: £45.00
Heatmiser EA1 - Extended Aerial Our external aerial is designed to work with our UH8-RF v2 Wireless Wiring Centre. Radio Frequency (RF) communication is affected by metal objects and so this external aerial is ideal for those installations where the UH8-RF v2... MSRP: Was: Now: £14.20
Wireless Window / Door Contact Sensor Heatmiser Wireless Window / Door Sensor The Wireless Window / Door Sensor can be used with the Touch V2, Edge and Neo System and and is used to switch the heating off whenever a window or door is opened. The Wireless Sensor... MSRP: Was: Now: £20.30
Heatmiser Boost v2 - Neo & RF Series Repeater Heatmiser Boost v2 The Heatmiser Boost v2 is our Neo & RF Series Repeater, compatible with the neoHub G2, neoHub Mini, UH8-RF v2 and RF Switch v2. The Boost v2 is surface mount for easy installation and can be used to repeat... MSRP: Was: Now: £55.15
Heatmiser TM4 v2 - 230v 4 Channel TimeClock The Heatmiser TM4 v2 is a 4 Zone Programmer, designed to work with our UH8 wiring centre, but could equally be used to replace a standard programmer. Programmers are often difficult to understand, made worse by the fact that they... MSRP: Was: Now: £80.75
