Product Description
Heatmiser Wireless Air Sensor
Important compatibility notice:
The Wireless Air Sensor is only compatible with neoHub G2 and is not supported by neoHub G3. If you are using neoHub G3, please do not purchase this sensor.
The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required.
The Wireless Air Sensor pairs directly with the Touch v2 and Edge. When used with the Neo System, the sensor pairs to the neoHub G2 and is then linked to the appropriate zone.
Using the Wireless Air Sensor with the Neo System
With this addition, your Neo system can measure temperature from a single wireless air sensor or multiple sensors when an averaged reading is required across a larger area.
The Wireless Air Sensor pairs to the neoHub G2 using the Android or iOS app. Once linked, you can choose how the system operates:
- Monitoring – Measure temperature in another area of the home.
- Pair to Zone – Link the sensor to an existing neoStat.
If you select Pair to Zone, two options are available:
- Averaging – Combines the thermostat’s internal sensor with the wireless sensor.
- Remote Only – Disables the internal sensor and uses the wireless sensor as the primary temperature reference. Multiple sensors will be averaged.
Specification
Range: 40 metres open space. The Wireless Air Sensor communicates directly with the neoHub G2 and does not benefit from the Neo mesh network. Additional boosters such as neoPlug or Boost may be required.
RF Frequency: 868MHz
IP Protection: IP20
Important Neo Compatibility Notes
- Wireless Air Sensor support is only available on neoHub G2. It is not compatible with neoHub G3. To identify your hub, check the rear label for “2nd Generation”.
- The Wireless Air Sensor is not visible in Apple HomeKit.
- The sensor communicates directly with neoHub G2. Signal boosters may be required depending on property size.
- For compatible thermostats, consult the Wireless Air Sensor datasheet.
Product Videos
Custom Field
Product Reviews
97 Reviews Hide Reviews Show Reviews
-
Review
Signal range very close. Some time just stops communicating for no reason.
-
Review
Ideal for bathroom underfloor heating where thermostat needs to be outside the room - easy to pair via the hub and app and small and subtle to mount discreetly.
-
Review
I now have 4 air sensors in different zones. They are great for my house to give better temperature control. They are inclined to lose wifi and drop out despite my use of the heatmiser plugs but all in all I'm happy with them.
-
Review
Haven't tested yet
-
Review
Works exactly as expected. And small! about size of 50 pence piece, but fatter!
-
Review
Great little Sensor
-
Review
Arrived in good protective packaging. Followed the set up instructions and sensor was up and running. Paired with thermostat which is in a bad position so reading a more accurate temperature.
-
Review
Works well, but needs to be within reach of the hub. Would be much better if it could join the mesh... which it can't
-
Review
The instructions for use could be more extensive. Getting it to pair with my Neo hub has been frustrating.