Product Description
Heatmiser Slimline-RF Bundle v3
The Heatmiser Slimline-RF Bundle v3 comprises of a Heatmiser Slimline-RF v3 Multi Mode Thermostat and RF-Switch v2 wireless receiver. The receiver is hard wired to the boiler, so is normally positioned next to the boiler or you could use the existing thermostat cabling. The wireless thermostat is then wall mounted within range of the receiver (up to 100 meters open space)
The RF Switch v2 is a 3 Channel Receiver providing 3 changeover contacts, 2 for the heating circuit and 1 for the hot water circuit. In addition, the RF Switch v2 provides a volt free switch for the boiler. The RF Switch v2 can be paired to the UH8-RF v2 to provide a wireless link for the boiler signal.
Multi Mode: Can be setup to work in one of three modes;
- Non Programmable Thermostat
- Programmable Thermostat
- Programmable Thermostat with Hot Water Output
- Wireless Thermostat - 868MHz
- Heating & Hot water Outputs
- Distance: Up to 100 Meters Open Space
- Large Back Lit Display
- 5/2 or 7 Day Programming Modes
- 4 Comfort Levels per Day
- Optimum Start
- Wireless Fail Safe Function
- ºC/F Option
- 05ºC - 35ºC Range
- Holiday Function
- Hold Function
- Wall Mount
- Frost Protection
- Key Lock Facility
- Battery: 2 x AAA (Included)
- Compatible with UH8-RF v2 & Heatmiser Boost v2
- Remote Air Sensing Facility (Ideal for measuring the air temperature up to 20 meters from the thermostat, in bathrooms for example. Remote sensor probe required, not included)
- Dimensions: 98mm x 85mm x 24mm (Height, Width, Depth)
Kit Includes
1 x Slimline-RF v3 1 x RF Switch v2
Warranty Information
2 Years Direct Manufacturers WarrantyProduct Videos
Temperature Sensing Modes
Popular Questions
Press the power button for 3 seconds
Press the clock button for 3 seconds
Tap the clock button until the small number goes to 10
Press the down arrow to make the large number 00… See full answer »
