Product Description
Heatmiser Slimline-RF Bundle v3
The Heatmiser Slimline-RF Bundle v3 comprises of a Heatmiser Slimline-RF v3 Multi Mode Thermostat and RF-Switch v2 wireless receiver. The receiver is hard wired to the boiler, so is normally positioned next to the boiler or you could use the existing thermostat cabling. The wireless thermostat is then wall mounted within range of the receiver (up to 100 meters open space)
The RF Switch v2 is a 3 Channel Receiver providing 3 changeover contacts, 2 for the heating circuit and 1 for the hot water circuit. In addition, the RF Switch v2 provides a volt free switch for the boiler. The RF Switch v2 can be paired to the UH8-RF v2 to provide a wireless link for the boiler signal.
Multi Mode: Can be setup to work in one of three modes;
- Non Programmable Thermostat
- Programmable Thermostat
- Programmable Thermostat with Hot Water Output
- Wireless Thermostat - 868MHz
- Heating & Hot water Outputs
- Distance: Up to 100 Meters Open Space
- Large Back Lit Display
- 5/2 or 7 Day Programming Modes
- 4 Comfort Levels per Day
- Optimum Start
- Wireless Fail Safe Function
- ºC/F Option
- 05ºC - 35ºC Range
- Holiday Function
- Hold Function
- Wall Mount
- Frost Protection
- Key Lock Facility
- Battery: 2 x AAA (Included)
- Compatible with UH8-RF v2 & Heatmiser Boost v2
- Remote Air Sensing Facility (Ideal for measuring the air temperature up to 20 meters from the thermostat, in bathrooms for example. Remote sensor probe required, not included)
- Dimensions: 98mm x 85mm x 24mm (Height, Width, Depth)
Kit Includes
1 x Slimline-RF v3 1 x RF Switch v2
Warranty Information
2 Years Direct Manufacturers WarrantyProduct Videos
Custom Field
Product Reviews
16 Reviews Hide Reviews Show Reviews
-
Review
Great service and value
-
Review
My previous Heatmiser wireless kit lasted 10 years. I was slightly miffed to learn it had become obsolete in this time and I couldnt just replace the wireless receiver. However the kit was easily diy installed and now has 3 channels (boiler, heating and hot water). Only gripe, thermostat does not display floor temp for underfloor heating although I have connected remote thermostat and it appears to be working. Overall good quality and worth the money. Heatmiser Reply: Thanks for your review. The Slimline-RF doesn't have a remote floor sensor function. Whilst you can connect a remote sensor, this is designed to measure the air temperature remote from the thermostat and is why the thermostat always shows Room Temp.
-
Review
good item
-
Review
Great kit, does what its meant to do. Easy programming.
-
Review
Worked well
-
Review
Very neat but a little difficult to set up.
-
Review
Reliable and fairly priced
