Product Description
Heatmiser RF-Switch 16A
The RF-Switch 16A is our surface mount wireless receiver for electric heating. It is capable of switching up to 16A.
Please note this is not designed for electric floor heating as there is no floor limiting sensor function.
Compatibility
The RF Switch is compatible with the Slimline-RF and neoAir.
Warranty Information
2 Years Direct Manufacturer WarrantyProduct Videos
Custom Field
Product Reviews
5 Reviews Hide Reviews Show Reviews
-
Good product, but could be better
This unit works well and the range between my NeoAir and the switch spans 2 floors of a domestic property. But there are three important points to be aware of: 1. The width of the unit is 108mm, 20mm wider than a standard single UK face-plate, so this cannot be installed onto an existing back-box if it is 'flush' with an adjacent face-plate/back-box. 2. the wiring is designed to be internal (from the back) which isn't convenient if you want to replace an existing switched outlet plate (as I do). You will need to cut holes in the front casing and devise some way to restrain the cable at exit. 3. the override switch isn't very useful, certainly cannot be used by the end-consumer. After a lot of experimentation it looks like my NeoAir sends out a repeat status command every 20 minutes. Thus, if NeoAir isn't calling for heat and the 16A switch override is used, NeoAir will send a repeat "off" command which switches the unit off and cancels the override.
-
Review
A big leap forward from the old switches - much better quality and again very easy to set up
-
Review
Easy to pair and worked out of the box perfectly!
-
Review
Excellent piece of kit
-
Review
Excellent service
