
The Heatmiser neoAir v2-M is our programmable wireless thermostat that is compatible with our RF Switch / UH8-RF and neoHub Mini Wireless Receivers.
Features:
- Battery Powered
- Heating Mode, Hot Water, Heating & Hot Water Mode
- Stunning design incorporating illuminated soft touch keys
- Remote Sensing Option
- User Selectable Operating Mode: 1) Non Programmable 2) Weekday/Weekend 3) All days different. 4) All days the same
- 5 Minute Program Intervals
- 0.5C Set Temp (eg 20.5C)
- Self Learning Optimum Start
- 4 Comfort Levels per Day
- Temperature Hold Facility
- Holiday Facility
- Automatic White Back Light (Turns off after 5 seconds)
- Surface Mounting
- C/F Selectable
- Key Code Facility
- Frost Protection
Important
Please note there is no receiver included with this product. If you require a receiver, please select one from the option available above.
The neoAir V2-M is compatible with the following hubs;
neoHub Mini OT - Select this hub if you have up to 2 heating zones and an OpenTherm compatible boiler.
neoHub Mini HW - Select this hub if you have up to 2 heating zones and a hot water cylinder.
neoHub - Select this hub if you have up to 32 heating/hot water zones.
Wireless Air Sensor & Door Contact Function - neoHub required
When paired to the neoHub, you can use the wireless air sensor to measure the temperate remotely from the neoStat or to take an average temperature in a larger room. You can also have the heating turn off whenever a window or door is opened with the use of the door contact switch.
43 Reviews Hide Reviews Show Reviews
-
Review
Excellent product. Installation instructions clear and concise
-
Review
Easy 2 install set up and use
-
Review
Neo is the best in the market
-
Review
Used as a replacement for an earlier Heatmiser Stat that failed. The new design is neat and the display bright. Heatmiser products are well manufactured and have served me well for the last four years.
-
Review
Touch buttons are very sensitive, not working every time, had a bit of trouble connecting 2 out of 3 Neoair. Two would not show up on the app, i am going back to reset them & reconnect
-
Review
GOOD. Has all then functions i want in a smart device. A couple more buttons or homepage shortcuts to give the classic +30mins heating or +30mins hot water. It takes 3 clicks to boost. Needs to be one click. Good product, but suffers from the classic modern problem like DAB radios where all the 100 years of knowledge about industrial design had been lost. Like people preferring buttons that click and nobs that turn and critical functions being one click or one turn. This device would be too complex for an 80 year old and someone with dementia. It needs to be able to work for them too. Four stars because it is at the BETTER end of this problem in terms of all the systems I've had. But bring back all the user experience design which means my older heating system is actually much easier to use for the 90% of most common functions. I'd pay £10 more for more real buttons and nobs. People have managed to build robust kit with these components in the past. Why not now?